TO DO

ACTION

ADD PREFIX/ REMOVING PREFIX

ACCESS CODE FOR OUTGOING CALLS

9 + (XXX)XXX-XXXX

ADD

PRESS DOWN ARROW KEY  ¯ , SELECT OTHER SET UP, PASSWORD? 1 ALPHA, ALPHA 66831, PRESS GREEN ENTER KEY,PRESS DOWN ARROW KEY ¯ , SELECT TERMINAL, TERMINAL SHOULD DISPLAY EDIT TERMINAL #1/1:, PRESS SELECT(F3), PRESS NEXT UNTIL "PABX CODE" APPEARS ON SCREEN, PRESS EDIT, TERMINAL WILL PROMPT NEW:, KEY IN PABX ACCESS CODE, PRESS GREEN ENTER KEY, SAVE CHANGES, EXIT, PRESS RED CLEAR KEY TO EXIT TO IDLE SCREEN.

REMOVE

PRESS DOWN ARROW KEY ¯ , SELECT OTHER SET UP, PASSWORD? 1 ALPHA, ALPHA 66831, PRESS GREEN ENTER KEY, PRESS DOWN ARROW KEY ¯ , SELECT TERMINAL, TERMINAL SHOULD DISPLAY EDIT TERMINAL #1/1:, PRESS SELECT(F3), PRESS NEXT UNTIL "PABX CODE" APPEARS ON SCREEN, PRESS EDIT, TERMINAL WILL PROMPT NEW:, JUST PRESS GREEN ENTER KEY TO REMOVE EXISTING, SAVE CHANGES, EXIT, PRESS RED CLEAR KEY TO EXIT TO IDLE SCREEN.

 

CHANGE DATE & TIME

PRESS DOWN ARROW KEY  ¯ , SELECT OTHER SET UP, PASSWORD? 1 ALPHA ALPHA 66831, PRESS GREEN ENTER KEY, PRESS DOWN ARROW KEY  ¯ , SELECT DATE/TIME, KEY IN CURRENT DATE MM/DD/YYYY, PRESS GREEN  ENTER KEY, KEY IN CURRENT TIME HH/MM/SS, PRESS GREEN ENTER KEY,  PRESS RED CLEAR KEY TO EXIT TO IDLE SCREEN.

ADDING/REMOVING SERVER

ADD

PRESS DOWN ARROW KEY ¯

SELECT SERVER SET UP

CHOOSE ADD SERVER,

PASSWORD? 1 ALPHA ALPHA 66831,PRESS GREEN ENTER KEY,

KEY SERVER # DESIRED,

PRESS GREEN ENTER KEY ,KEY IN PASSWORD (ASSIGNED BY EACH SERVER), PRESS GREEN ENTER KEY, RE-ENTER PASSWORD, PRESS GREEN ENTER KEY,  PRESS  RED CLEAR TO EXIT IDLE SCREEN.

 

REMOVE

PRESS DOWN ARROW KEY ¯,

SELECT SERVER SET UP,

PRESS DOWN ARROW KEY  ¯ , CHOOSE DELETE SERVER, PASSWORD? 1 ALPHA ALPHA 66831,PRESS GREEN ENTER KEY, KEY SERVER # TO BE DELETED, PRESS GREEN ENTER KEY, KEY IN PASSWORD (ASSIGNED BY EACH SERVER), PRESS GREEN ENTER KEY,  PRESS REDCLEAR TO EXIT TO IDLE SCREEN.

ENABLE/DISABLE PRINTER

PRESS DOWN ARROW KEY   ¯, SELECT OTHER SETUP, PASSWORD? 1,ALPHA, ALPHA, 66831, PRESS GREEN ENTER KEY, SELECT PRINTER,  TERMINAL  SHOULD DISPLAY “ EDIT PCT #1/1:”,CHOOSE SELECT, PRESS NEXT UNTIL “ENABLE PRINTER” , CHOOSE EDIT, SELECT ON=F1 / OFF=F2, EXIT, SAVE CHANGES, EXIT, RED CLEAR KEY TO EXIT TO IDLE SCREEN.